|
Kwik-Way
FWII
Boring Bar
Cylinder Boring
Bars
For Automotive,
Light Truck, Motorcycle,
Marine & Small
Engine Applications
The Model FWII Boring Bar has two
feed and speed combinations and is well suited for use
in today's down-sized engines. This bar can bore
directly from the deck of the engine block or be used on
an engine boring fixture.
-
Bore
capacity of 2.2" to 4.44" (56-113mm)
-
Three
finger centering for maximum accuracy
-
Quick,
positive anchoring
-
Exclusive
3 year limited warranty
[Download Literature]
[Download
Manual]
|
|
Kwik-Way FW Portable Boring Bar
-
Great for compact, sub-compact and import
passenger cars and light trucks
-
Two speeds provide necessary speed/feed
range
-
Bore directly off the deck of the block
or use on either the 1291 Small Engine or 054 HD Boring Fixture
-
Standard accessories and handy storage
case
[Specifications]
[Standard Accessories]
|
|
|
| |
Positive Anchoring with Uniform Clamping
-
The built-in clamping device quickly and positively clamps
the machine to the block or table, exerting an even,
uniform, downward pressure over the entire base surface
without disturbing accuracy of centering or distorting the
block.
Tool Dressing
|
|
Three-Finger
Centering
Special Micrometer
for Tool Setting
|
|
|
|
Specifications: |
|
|
Standard
Accessories: |
|
|
Bore Capacity |
2.2" to 4.44"
(56 to 113mm) |
|
1/8" Hex Key |
000-0600-54 |
|
Stroke |
12" (305mm) |
|
5/32" Hex Key |
000-0600-62 |
|
Speeds |
2 |
|
3/16" Hex Key |
000-0600-70 |
| |
Motor |
1/2 hp |
|
5/16" Hex Key |
000-0600-20 |
|
Overall Height |
35" (889mm) |
|
Centering Screw, Medium (3) |
062-0456-04 |
|
Overall Depth |
15-1/2" (393mm) |
|
Centering Screw, Long (3) |
055-0457-47 |
|
Overall Width |
11" (279mm) |
|
Carrying Case |
057-0500-04 |
|
Shipping Weight |
197 lbs (89.5kg) |
|
Micrometer Assembly, Wide Face |
|
|
|
|
|
Tool Holder Assembly, Roughing,
Short |
057-1025-19 |
|
Ordering
Information: |
|
|
Tool Holder Assembly, Roughing |
057-1021-10 |
|
FWII Standard
Boring Bar
-115V/60Hz/1Ph |
057-0010-03 |
|
Stop Rod Assembly |
057-0175-03 |
|
FWII Standard
Boring Bar
-230V/60Hz/1Ph |
057-0010-20 |
|
Centering Finger #1 (set of 3) .920"
Long |
063-0360-56 |
|
FWII Standard
Boring Bar, Metric
-115V/60Hz/1Ph |
057-0010-11 |
|
Centering Finger #2 (set of 3) 1.057"
Long |
063-0360-72 |
|
FWII
Standard Boring Bar
-230V/50Hz/1Ph |
057-0010-62 |
|
Centering Finger #3 (set of 3) 1.240"
Long |
063-0361-53 |
|
FWII Standard
Boring Bar, Metric
-230V/50Hz/1Ph |
057-0010-70 |
|
Centering Finger #4 (set of 3) 1.400"
Long |
063-0362-50 |
|
|
|
|
Centering Finger #5 (set of 3) 1.5660
Long |
063-0363-58 |
|
Optional
Accessories: |
|
|
Centering Finger #6 (set of 3) 1.720"
Long |
063-0364-55 |
|
054 Heavy Duty Boring Bar Fixture |
054-0000-35 |
|
Centering Finger #7 (set of 3) 1.880"
Long |
063-0366-50 |
| |
Block Lifting Fixture |
054-0600-00 |
|
Lapping Fixture Assembly |
062-0540-18 |
| |
054 Engine Dolly |
054-0200-00 |
|
Lapping Fixture Assembly, Roughing |
062-0555-10 |
| |
OMC 60 Deg. Adapter Plate |
054-1300-00 |
|
Basic Anchor Assembly |
057-0450-51 |
| |
1291 Small Engine Boring
Bar Fixture |
057-1291-07 |
|
Extension Rod Assembly |
055-0471-11 |
| |
Optional Small V-Block Mounting Kit |
054-0300-00 |
|
Anchor Gauge |
062-0459-49 |
| |
|
|
|
Anchor Clamp Assembly #0 |
057-0460-23 |
| |
|
|
|
Anchor Clamp Assembly #1 |
055-0481-23 |
| |
Formula I
Carbide Boring Tools: |
|
|
Anchor Clamp Assembly #2 |
055-0462-20 |
| |
Single Pass-Rough Cut |
062-1071-50 |
|
Anchor Clamp Assembly #3 |
055-0463-28 |
| |
Counter bore
- cut off sleeves, counter bore
blocks |
062-1074-50 |
|
#704 Armstrong Engineers Wrench |
000-8800-27 |
| |
45 Degree Offset
- for blind holes in manual
center bars |
062-1251-50 |
|
3/8" Diamond Round Bristle Brush |
000-8900-22 |
| |
|
|
|
Green Touch-Up Paint |
000-9602-31 |
| |
|
|
|
Diamond Lapping Oil, 1oz |
002-0023-45 |
